Skip to content
calctrowel

Gravel Driveway Calculator

A typical gravel driveway is 4-6 in (10-15 cm) of compacted stone. A 50 × 12 ft driveway at 4 in deep needs about 7.4 yd³, or roughly 10.4 tons of crushed stone without waste. Add 10% for compaction: about 11.5 tons.

Enter your measurements

ft
ft
in

Use 4-6 in (10-15 cm) total, usually as a base layer plus a top layer.

%
$/yd³
$/ton
Volume needed
2.72 yd³ (73.33 ft³)
Approximate weight
3.85 tons (7,691 lb)At ~1,680 kg/m³

Popular sizes

Formula

imperial

Tons = length (ft) × width (ft) × depth (in) ÷ 324 × density (tons/yd³)

metric

Tonnes = length (m) × width (m) × depth (cm) ÷ 100 × density (t/m³)

How to use this calculator

  1. 1Enter driveway length and width.
  2. 2Enter the total depth across all layers.
  3. 3Pick the stone. Crusher run compacts best for the base layer.
  4. 4Add 10-15% for compaction.

Pro tips

  • Build in layers: larger stone (#3 or 40-75 mm) base, then crusher run, then a decorative top layer.
  • Single-lane driveways are usually 10-12 ft (3-3.6 m) wide.

Frequently asked questions

How many tons of gravel for a 100 ft driveway?

A 100 × 12 ft driveway at 4 in deep is about 14.8 yd³, roughly 21 tons of crushed stone, or 23 tons with 10% extra.

What is the best gravel for a driveway?

Crusher run (also called road base, DGA or MOT Type 1) for the base, because the fines compact into a solid layer. A clean #57 stone or similar is a common top layer.