Skip to content
calctrowel

How much gravel for a 200 ft driveway?

A 200 ft long, 12 ft wide driveway at 4 inches deep needs 32.59 yd³ of crushed gravel (24.919 m³), which weighs about 46.15 tons, including 10% extra for compaction.

Enter your measurements

ft
ft
in

Use 4-6 in (10-15 cm) total, usually as a base layer plus a top layer.

%
$/yd³
$/ton
Volume needed
32.59 yd³ (880 ft³)
Approximate weight
46.15 tons (92,293 lb)At ~1,680 kg/m³

Quick reference

Gravel for a 200 × 12 ft driveway by depth (10% extra included)
DepthVolume neededApproximate weight
4 in32.59 yd³ (880 ft³)46.15 tons (92,293 lb)
6 in48.89 yd³ (1,320 ft³)69.22 tons (138,440 lb)
8 in65.19 yd³ (1,760 ft³)92.29 tons (184,587 lb)

Frequently asked questions

How many tons of gravel for a 200 ft driveway?

About 46.15 tons for a 12 ft wide driveway at 4 inches deep. New driveways are usually built 6-8 inches deep in layers. See the table above.

What gravel is best for a driveway?

Use a compacting base such as crusher run or #3 stone at the bottom and a smaller crushed stone such as #57 on top. Avoid rounded pea gravel as a base because it doesn't lock together.

What if my driveway is wider or narrower than 12 ft?

Single-car driveways are typically 10-12 ft wide and double driveways 20-24 ft. Enter your exact width in the calculator above.

Other sizes

Need a different size? Use the full gravel driveway calculator or pick a common project: