Skip to content
calctrowel

Fence Calculator

Divide the fence length by the post spacing and round up to get sections; posts = sections + 1. A 100 ft fence with 8 ft spacing needs 13 sections, 14 posts and 26 rails (2 per section). With 5.5 in pickets and no gap it needs 219 pickets.

Enter your measurements

ft
ft

Most wood fences: 6-8 ft (1.8-2.4 m).

in
in
Posts
14 posts
Sections
13
Rails
26 rails
Pickets / boards
219 pickets

Formula

imperial

Posts = ⌈length ÷ spacing⌉ + 1 · Pickets = ⌈length (in) ÷ (picket width + gap)⌉

metric

Posts = ⌈length ÷ spacing⌉ + 1 · Pickets = ⌈length (cm) ÷ (picket width + gap)⌉

How to use this calculator

  1. 1Enter the total fence length.
  2. 2Enter the post spacing, usually 6-8 ft (1.8-2.4 m).
  3. 3Enter rails per section and picket width and gap.
  4. 4Add gates; each gate adds a post.

Pro tips

  • Bury posts at least ⅓ of their above-ground height, and below the frost line in cold climates.
  • Use the concrete calculator's column shape to work out concrete for each post hole.

Frequently asked questions

How many fence posts do I need for 100 feet?

14 posts at 8 ft spacing, or 18 posts at 6 ft spacing, for a straight run.

How many pickets per 8 ft section?

About 18 pickets of 5.5 in width with no gap, or 16 with a ½ in gap.