Skip to content
calctrowel

How much gravel for a 50 ft driveway?

A 50 ft long, 12 ft wide driveway at 4 inches deep needs 8.15 yd³ of crushed gravel (6.23 m³), which weighs about 11.54 tons, including 10% extra for compaction.

Enter your measurements

ft
ft
in

Use 4-6 in (10-15 cm) total, usually as a base layer plus a top layer.

%
$/yd³
$/ton
Volume needed
8.15 yd³ (220 ft³)
Approximate weight
11.54 tons (23,073 lb)At ~1,680 kg/m³

Quick reference

Gravel for a 50 × 12 ft driveway by depth (10% extra included)
DepthVolume neededApproximate weight
4 in8.15 yd³ (220 ft³)11.54 tons (23,073 lb)
6 in12.22 yd³ (330 ft³)17.31 tons (34,610 lb)
8 in16.3 yd³ (440 ft³)23.07 tons (46,147 lb)

Frequently asked questions

How many tons of gravel for a 50 ft driveway?

About 11.54 tons for a 12 ft wide driveway at 4 inches deep. New driveways are usually built 6-8 inches deep in layers. See the table above.

What gravel is best for a driveway?

Use a compacting base such as crusher run or #3 stone at the bottom and a smaller crushed stone such as #57 on top. Avoid rounded pea gravel as a base because it doesn't lock together.

What if my driveway is wider or narrower than 12 ft?

Single-car driveways are typically 10-12 ft wide and double driveways 20-24 ft. Enter your exact width in the calculator above.

Other sizes

Need a different size? Use the full gravel driveway calculator or pick a common project: