Skip to content
calctrowel

Concrete Slab Cost Calculator

A poured concrete slab usually costs $6-$12 per square foot installed in the US, or $4-$8 per square foot DIY. For example, a 20 × 20 ft slab that is 4 in thick needs about 5.4 yd³ with waste. At $165/yd³ that is about $900 of concrete, plus base, mesh and forms. Labour typically adds $2-$6 per ft².

Enter your measurements

ft
ft
in
%
$/yd³
$/ft²
$/ft²
Total estimated cost
$1,496.30
Cost per area
$3.74 / ft²
Concrete
$896.305.43 yd³
Other materials
$600.00
Labour
$0.00
Slab area
400 ft²

Formula

imperial

Cost = (yd³ × price per yd³) + (ft² × other materials per ft²) + (ft² × labour per ft²)

metric

Cost = (m³ × price per m³) + (m² × other materials per m²) + (m² × labour per m²)

How to use this calculator

  1. 1Enter slab length, width and thickness.
  2. 2Pick ready-mix truck or bagged concrete and enter your local price.
  3. 3Add other material costs per area (gravel base, rebar or mesh, forms, vapour barrier).
  4. 4Add labour per area if you are hiring a contractor.
  5. 5Read the total cost and cost per square foot / metre.

Pro tips

  • Get at least 3 quotes. Concrete prices vary a lot by region and season.
  • Small orders often carry a short-load fee. Combine pours if you can.
  • Thicker slabs cost more in concrete but very little more in labour.

Frequently asked questions

How much does a 20×20 concrete slab cost?

A 400 ft² slab at 4 in thick usually costs $2,400-$4,800 installed in the US. In materials alone, expect about $900-$1,100 of ready-mix plus $400-$800 for base, reinforcement and forms.

Is it cheaper to mix your own concrete?

For small jobs under about 1 yd³ (0.75 m³), yes. For anything larger, ready-mix is usually similar in cost and far less labour, and gives a more consistent slab.

How much does a concrete slab cost per square metre?

Installed slabs typically cost the equivalent of $65-$130 per m² depending on country, thickness and access. Enter your local prices for an accurate figure.