Gravel Calculator
Multiply the area by the depth to get volume, then multiply by the density to get weight. Crushed stone weighs about 1.4 tons per cubic yard (1.68 tonnes per m³). A 20 × 10 ft path 3 in deep needs about 1.85 yd³, or roughly 2.9 tons with 10% extra.
Enter your measurements
Volume needed
2.04 yd³ (55 ft³)
- Approximate weight
- 2.88 tons (5,768 lb)At ~1,680 kg/m³
Popular sizes
Formula
imperial
Tons = length (ft) × width (ft) × depth (in) ÷ 324 × 1.4
metric
Tonnes = length (m) × width (m) × depth (cm) ÷ 100 × 1.68
How to use this calculator
- 1Choose rectangle, circle, or type the area if you already know it.
- 2Enter the depth of gravel you want.
- 3Pick the material. Density changes the weight.
- 4Add your price per yard/m³ or per ton/tonne to get the cost.
Pro tips
- Quarries often sell by weight; landscape yards often sell by volume. The calculator gives both.
- Lay landscape fabric first to keep weeds out and stop gravel sinking into soil.
- Densities are typical values. Wet or very fine material is heavier.
Frequently asked questions
How much does a cubic yard of gravel weigh?
About 2,800 lb (1.4 short tons) for crushed stone. Pea gravel is around 2,550 lb, and crusher run or road base is closer to 3,400 lb.
How much area does a ton of gravel cover?
At 2 in deep a ton of crushed stone covers about 115 ft²; at 3 in, about 77 ft²; at 4 in, about 58 ft².
How deep should gravel be?
Walkways and paths: 2-3 in (5-7.5 cm). Patios: 3-4 in. Driveways: 4-6 in or more, built in compacted layers over a sub-base.